2021-2023 FORD BRONCO | OE PLUS SERIES FRONT BUMPER

Offroad has designed a tubular bull bar for the Bronco’s factory modular steel bumper as an alternative for the OEM bull bar. It sits much lower in front of the grille than the OEM version, giving it a low profile appearance. The tube features 2 adjustable light mounts that allow for LED lighting to be mounted above or below the bar. Lighting options include mounting up to a 20-inch light bar above or below the tube, or an LED pod light on each of the 2 tabs. The mounting plates are constructed of 3mm steel, and the bar is made from 1.5-inch diameter x 1.5mm thick steel tubing. The bull bar is finished in a rust-resistant dual stage micro-texture black powder coat. Installation is a simple half-hour process that utilizes the 8 factory bolts already present on the Bronco’s steel bumper. Our bull bar light mount works great in tandem with our Factory Bumper Pocket Light Mounts! **Note: Does not fit the factory plastic bumper, nor the capable bumper. **Note: Elite Light Bar Rail Mounts are needed to mount a light bar. They can be added to your cart through the drop down menu. Key Features:

• Low Profile Design
• 2 Adjustable Light Mounts for 20” Light Bar or Pods
• Micro-Texture Black Powder Coat
• Bolt-On Installation

The DV8 Offroad MTO (Made to Overland) Series Bumper is a Winch-Ready Front Bumper for the 2021-2023 Ford Bronco, and is compatible with all trim levels. Manufactured from high-grade steel, the MTO Series Bronco bumper retains the factory sensors, has a 3-inch pod light mount towards each side, and mesh inserts that can be painted. There is an optional bolt-on bull bar that can mount a 13-inch LED light bar to supplement your lighting. The winch mounting point was designed to sit within the bumper, and is accessible through 2 openings at the top of the bumper. It can mount up to a 12,000 lb. winch. If you choose not to run a winch, we include light brackets to mount a single row 20-inch light bar behind the perforated aluminum accent plate. The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right. ** An Optional Steel Skid Plate is available for this bumper. Key Features:

• Optional Bull Bar
• (2) 3” Pod Light Mounts
• 2-Stage Micro-Texture Powder Coating
• 4mm Body and 5mm Mounts/Supports
• In-Bumper Winch Mount
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Works with Factory Parking Sensors
• Paintable Aluminum Mesh Panels
• 3-Piece Construction

The DV8 Bronco Front Skid Plate was designed to work with both the original OEM bumpers or our aftermarket Bronco bumpers. If your Bronco has the factory plastic skid plate, this is the perfect upgrade to maximize the protection to the front undercarriage. It also protects the sway bar disconnect on the Badlands and First Edition trims. Made from 3.5mm Steel Plates & 5mm Steel Supports, it can handle anything the trail throws at you! Key Features:

• Micro-Texture Black Powder Coat
• Protects Front Underbody
• Constructed from 3.5mm Steel Plates & 5mm Steel Supports
• Paintable Aluminum Mesh Inserts
• Easy Bolt-On Installation

The DV8 Offroad LBUN-01 is a bolt-on bull bar with light mount for MTO Series Front Bumpers. Manufactured from high grade steel and protected with a powder coat finish, the LBUN-01 can mount the DV8 Offroad 13-Inch Elite Series Light Bar. Key Features:

• Accommodates 13-Inch Elite Series Light Bar
• 2-Stage Micro-Texture Powder Coat
• Bolt-on Installation

Please Note: This is only compatible with bumpers listed in the fitment section. This is not compatible with the Tacoma MTO Front Bumper.